Cicada Gold Hairpin 3D Model

A traditional-style hairpin combining a cicada, openwork leaves, and jewel-colored inserts in a printable assembly. Generated by Kimi K3.1 Pro.

Try 3D Make View membership plan

Loading preview...

Start from this prompt

A printable gold hairpin combining a cicada, openwork leaves and jewel-colored inserts.

Try 3D Make

Design a cicada-themed traditional hairpin about 180 mm long and 75 mm wide at the head. Build layered volume with the cicada, paired wings, and spreading leaves, using printable openwork or line patterns and a few red and blue-green jewel-shaped inserts. Make the stem, head, and inserts separately printable, with a replaceable stem, secure joints, rounded exposed edges, and balanced thickness and weight for wearing. Fit a 0.4 mm nozzle, 300×320×320 mm build volume, and multicolor PLA. Provide an editable model, color-assigned and plate-arranged 3MF, assembled preview, and printing and assembly instructions.

Add touch controls

Adds phone controls and layout without changing the other requirements.

Try 3D Make

Design a cicada-themed traditional hairpin about 180 mm long and 75 mm wide at the head. Build layered volume with the cicada, paired wings, and spreading leaves, using printable openwork or line patterns and a few red and blue-green jewel-shaped inserts. Make the stem, head, and inserts separately printable, with a replaceable stem, secure joints, rounded exposed edges, and balanced thickness and weight for wearing. Fit a 0.4 mm nozzle, 300×320×320 mm build volume, and multicolor PLA. Provide an editable model, color-assigned and plate-arranged 3MF, assembled preview, and printing and assembly instructions.

Try a warmer palette

Changes the palette while preserving the other requirements.

Try 3D Make

Design a cicada-themed traditional hairpin about 180 mm long and 75 mm wide at the head. Build layered volume with the cicada, paired wings, and spreading leaves, using printable openwork or line patterns and a few red and blue-green jewel-shaped inserts. Make the stem, head, and inserts separately printable, with a replaceable stem, secure joints, rounded exposed edges, and balanced thickness and weight for wearing. Fit a 0.4 mm nozzle, 300×320×320 mm build volume, and multicolor PLA. Provide an editable model, color-assigned and plate-arranged 3MF, assembled preview, and printing and assembly instructions.