Mist Town Postcard
A foggy lamppost photo fills the front, marked only with the tiny name Mist Town; the back pairs short notes with three address lines and a serrated lamppost stamp.
1127 views
Start from this prompt
Front and back of a postcard from a foggy lamppost photo: full-bleed front, divided back, and a serrated stamp illustration.
Rename it Frost Harbor
The fictional place name changes from Mist Town to Frost Harbor; the layout stays the same.
Design itUse this photo of a lamppost in the fog to design the front and back of a postcard set, laid side by side on an off-white background. The two cards can cast a very light grounding shadow, as if real paper were photographed on a desk. Let the photo fill the front, adding only a tiny fictional place name “Mist Town” in one corner with a matching line of small English text beneath. Use the classic postcard structure on the back: a vertical divider down the middle, a writing area on the left holding two or three short lines that read like a sender's unfinished note, and three address lines on the right with a stamp box in the upper right corner. Don't repeat the photo inside the stamp box — instead place a minimal lamppost illustration distilled from the original image, edged with stamp serrations. Pull the whole palette from the photo: blue-gray, off-white, and a touch of dark blue. No decorative fonts.
Swap dark blue for ochre red
The touch of dark blue in the palette becomes ochre red; the other colors stay.
Design itUse this photo of a lamppost in the fog to design the front and back of a postcard set, laid side by side on an off-white background. The two cards can cast a very light grounding shadow, as if real paper were photographed on a desk. Let the photo fill the front, adding only a tiny fictional place name “Mist Town” in one corner with a matching line of small English text beneath. Use the classic postcard structure on the back: a vertical divider down the middle, a writing area on the left holding two or three short lines that read like a sender's unfinished note, and three address lines on the right with a stamp box in the upper right corner. Don't repeat the photo inside the stamp box — instead place a minimal lamppost illustration distilled from the original image, edged with stamp serrations. Pull the whole palette from the photo: blue-gray, off-white, and a touch of dark blue. No decorative fonts.
Add one more address line
The back grows from three address lines to four; everything else stays.
Design itUse this photo of a lamppost in the fog to design the front and back of a postcard set, laid side by side on an off-white background. The two cards can cast a very light grounding shadow, as if real paper were photographed on a desk. Let the photo fill the front, adding only a tiny fictional place name “Mist Town” in one corner with a matching line of small English text beneath. Use the classic postcard structure on the back: a vertical divider down the middle, a writing area on the left holding two or three short lines that read like a sender's unfinished note, and three address lines on the right with a stamp box in the upper right corner. Don't repeat the photo inside the stamp box — instead place a minimal lamppost illustration distilled from the original image, edged with stamp serrations. Pull the whole palette from the photo: blue-gray, off-white, and a touch of dark blue. No decorative fonts.