Six-Piece Burr Puzzle 3D Model

A six-piece interlocking puzzle made from notched square bars, assembled and unlocked through a sequence of moves. Generated by Kimi K3.1 Pro.

Try 3D Make View membership plan

Loading preview...

Start from this prompt

A six-piece interlocking puzzle made from notched square bars and assembled through a sequence of moves.

Try 3D Make

Design a six-piece burr puzzle about 80 mm across when assembled. Use exactly six connected, notched square bars, with two parallel bars along each of three perpendicular axes. The assembled puzzle should hold together when handled while allowing a clear sequence of manual assembly and unlocking, without glue, magnets, or extra pins. Leave room for gripping and movement, with adjustable bar length, section, and joint clearance; distinguish parts using colors or small marks. Fit a 0.4 mm nozzle, 300×320×320 mm build volume, and PLA. Provide an editable model, plate-arranged 3MF, assembled preview, and complete assembly and disassembly instructions.

Add touch controls

Adds phone controls and layout without changing the other requirements.

Try 3D Make

Design a six-piece burr puzzle about 80 mm across when assembled. Use exactly six connected, notched square bars, with two parallel bars along each of three perpendicular axes. The assembled puzzle should hold together when handled while allowing a clear sequence of manual assembly and unlocking, without glue, magnets, or extra pins. Leave room for gripping and movement, with adjustable bar length, section, and joint clearance; distinguish parts using colors or small marks. Fit a 0.4 mm nozzle, 300×320×320 mm build volume, and PLA. Provide an editable model, plate-arranged 3MF, assembled preview, and complete assembly and disassembly instructions.

Try a warmer palette

Changes the palette while preserving the other requirements.

Try 3D Make

Design a six-piece burr puzzle about 80 mm across when assembled. Use exactly six connected, notched square bars, with two parallel bars along each of three perpendicular axes. The assembled puzzle should hold together when handled while allowing a clear sequence of manual assembly and unlocking, without glue, magnets, or extra pins. Leave room for gripping and movement, with adjustable bar length, section, and joint clearance; distinguish parts using colors or small marks. Fit a 0.4 mm nozzle, 300×320×320 mm build volume, and PLA. Provide an editable model, plate-arranged 3MF, assembled preview, and complete assembly and disassembly instructions.